Gifts paragraph 2 on behalf of putty paste 2016 new listing!

1. Production Introduction

2nd Generation Elite PuttyPaste is an improved product over Elite Putty Paste.

Ingredients are made fromfood-grade additives and produced with our advanced technology.

Products are finer,whiter, and easier to be applied.

Putty becomes smoother,whiter after scraping application and can be combined with 303 Latex Paint,which makes coating of the wall smoother and better adhered to the wall.

The product isenvironmental friendly and certified under national environmental standards. Itis a green product.

2.  Product highlights

2nd Generation Elite PuttyPaste is an improved product over Elite Putty Paste. it is a economicalleveling agent for interior walls.

Ingredients are made fromfood-grade additives and produced with our advanced technology.

Products are finer,whiter, and easier to be applied. Putty is smooth and white after applicationand is ideal for use during latex paint application. It allows the latex paintcoating to become smoother and has greater bonding strength, which will greatlyprevent chipping.

The product is environmental friendly andcertified under national environmental standards. It is a green product. 

Technical standard:JC/T298-2010 (Putty for Indoor Use)(Type Y)

Environmental standard: GB 18582-2008(Limitation on toxins in interior wall coating material) 

*Packing style, please prevail in kind!

This is a finished productand is ready to be used upon unpacking. Please do not add other fillings.

Bases should be sturdy,clean, and free of dust and grease andshould have moisture level of less than 10%. Please allow 4 hours between eachapplication.

Each application shouldhave a thickness of between 0.5-2mm. If the thickness is greater than 2mm, 2applications are required. If the application is too thick, the coating mightexperience shrinkage or cracking.

Each square meter of arearequires 1 KG of product (2 applications). Actual usage is dependent on thelevelness of the wall surface.

Store in shady,ventilated, dry environment. Avoid direct sunlight and water and should bestored in temperature of 5-40℃; Good for 10 months if kept in normalenvironment.

Product is non-toxin andis an environmental friendly building material. Categorized as non-hazardousduring transit.

The temperature of workingenvironment should not be lower than 5℃