1, is mainly used for leveling concrete or cement mortar walls external wall;

2, the product has a strong adhesive force, well attached to the base surface;

3, has a certain toughness, good aging resistance and impermeability, and good water resistance, alkali resistance;

4, good construction, smooth finish, the initial drying and easy sanding; environmental protection, non-toxic and safe.

Implementation of standards: JG / T 157-2009 (P) "exterior wall putty"

Environmental standards: GB24408-2009 "building exterior latex paint harmful substances"

*Packing style, please prevail in kind!

1, primary treatment: external strong base surfaces must toil, surface clean and free from dust. Fill the pit, leveled projections, cellular, Ma surface pretreatment, primary should carry out the necessary maintenance, not too wet, but not too dry;

2, the recommended powder to water ratio of 1: 0.35, the actual amount of water to the construction consistency prevail. The first injection of the amount of water in the container, then the powder is added, and then use an electric mixer, stir. Stir for 15 minutes before use;

3, wall putty Scraping usually need twice, two putty Scraping must be dry before the first channel;

4, in order to avoid a greater wall putty shrinkage force, each time scraping thickness should be between 0.5-2mm, more than 2mm thickness required graded Scraping. Because this product is completely dry conditions at high intensity, we recommend sanding at the beginning of the dry state.

5, use per square meter of about 1.5-2.5kg (twice), the actual amount depending on the degree of surface smoothness of the wall may be.

1, stored in a cool, ventilated, dry environment at non-flooding

2, stored under standard conditions, the shelf life of 10 months

3, the product non-toxic, is environmentally friendly building materials, non-dangerous goods transport

4, as the product is completely dry conditions at high intensity, it is recommended in the early dry sanding state

5, the construction process ambient temperature is not lower than 5 ℃;